To determine that the alternator belt has broken one of the following:
1. The appearance of the empty battery icon on the control panel. This indicator is illuminated, because the work of generating the device or battery is broken.
2. Failures of external lighting devices. If the driver takes his foot off the gas pedal, the lights begin to Shine more dimly, when you touch the gas the brightness of optical devices is restored.
The weakening of the belt needs a key to tighten the tension rollers. Since the generating node is equipped with multiple rollers, each of them allows to set the desired degree of stretching. However, the absolute tightness until it stops is not recommended, as it will lead to more rapid wear and tear.
If you stop the drive belt, the user may encounter the following issues:
1. The generator set will not be able to feed the grid of the vehicle, including all equipment and devices.
2. All consumers tension begin to feed directly from the battery.
3. If the car is equipped with a drive belt gidrousilitel device (WTP) and air-conditioning system, obrw products will lead to the fact that these systems will not work. The pump Gur and the clutch unit will cease to function.
If broken, a new strap or straps constantly worn out, this may be due to:
When you encounter such problems there are two solutions:
1. If the degree of wear is not critical, try to set the strap back. However, if it is seriously worn out and can not be fixed on the pulleys, then over time it will fly again.
2. To cut the belt and drive to the nearest service station or garage where the repair will be made.
If you broke the alternator belt, you must do so:
The number of kilometers that the vehicle can travel depends on two factors:
If the vehicle engine does not start, you need to do this:
The consequences can be:
Preventive measures that will allow for timely identification of deterioration or to prevent it:
1. On most vehicles the replacement of the alternator belt in service documents should be made 1 every 30 thousand kilometers. It is necessary to observe the interval or follow the instructions in the technical manual.
2. The need to periodically check tension of the drive belt. The product must not be over tightened or weakened.
3. 1 in every 5 thousand kilometers should check the status of the drive product, or more often if there are signs of wear. The presence of cracks indicates wear and tear.
4. It is impossible to prevent oil or other fluids on the belt structure.
© 2019, paradox. All rights reserved.
An out-of-control ice cream truck rolled down a slope and crashed into a group of…
He was a staunch supporter of the anti-Bolshevik White Movement during the Russian Civil War…
Ukraine needs to defeat Russia on the battlefield in order to be admitted to NATO,…
Russia has carried out a strike on the Ukrainian military headquarters commanding troops in the southern…
Russian Defense Minister Sergey Shoigu has met with top military officials to discuss the battlefield…
The German ambassador to the Palestinian Authority has been hounded by an angry mob and…